Filter
Top Products
NetComm VoIP WiFi Phone V24W User Guide
Chapter 2: Getting to know your NetComm
V24W WiFi VoIP Phone
The Bottom Panel
The V24W Phone’s headset jack and USB port are located on the bottom panel.
Headset
Port USB Port
Headset Port This port allows you to connect a headset to the V24W.
USB Port The USB port allows you to attach the included power adapter.
The Front and Side Panel
1. Power LED
2. Volume up/down
3. Soft Key
4. Navigation Pad
5. Center Selection Key
6. Call
7. Power/End Call
8. Different Key Choices/+ symbol
9. Enter Symbol/Space
The Power LED is located at the top of the V24W VoIP Phone, while the buttons are located on
the front and side panels.
Power LED
(Blue/Red/Purple)
The LED is solid blue when the IP Phone is powered on and ready for calls.
The LED flashes red when the IP Phone is not ready to make or receives calls.
The LED alternates between blue and purple when the IP Phone is powered off and
charging.
YML873 V24W User Guide - 4