Filter
Top Products
NetComm VoIP WiFi Phone V24W User Guide
SIP Settings
The necessary setup information is supplied by your VoIP Service Provider. If you do not
have this information, contact your VoIP Service Provider before making any changes.
Press the Return soft key to return to the previous menu.
Refer to the table below for all SIP options.
Options Description
Proxy IP To add or change the Proxy IP address
Proxy Port To add or change the Proxy Port number
Register Proxy IP To add or change the Register Proxy IP address
Register Proxy Port To add or change the Register Proxy Port number
Outbound Proxy IP To add or change the Outbound Proxy IP address
Outbound Proxy Port To add or change the Outbound Proxy Port number
Expire Time To change the Expire Time (default is 3600)
Display Name This is the message displayed on the receiver’s caller ID
Phone Number To add or change the Phone Number you will use for VoIP phone calls
User Name To add or change the User Name used for authentication with the
Registration Server
Password To add or change the password used in conjunction with the User Name
for authentication with the Registration Server
Payload Type G.711a, G.729, and G.711u are the three Payload Types available. They
are listed in order of preference.
Packet Time There are two Packet Length Time available; small and large.
DTMF Relay. To disable and enable the DTMF relay feature.
UDP Port. To add or change the UDP Port number.
RTP Port. To add or change the RTP Port number.
Session Timer. To add or change the Session Timer. Session Timer is the periodic
refresh of SIP sessions through a re-INVITE or UPDATE request.
SIP Format To change the SIP format (Default is Normal). The other 2 choices may
be used with certain SIP Proxy Servers.
To add or change any settings, press the Edit soft key and enter the value in the prompt window.
Press the Center Selection key to save it or press the Exit soft key to return to the previous
screen.
For options with only choices, press the Edit soft key to scroll through the options list.
Press the Exit soft key to return to the SIP Setting screen.
YML873 V24W User Guide - 29