Filter
Top Products
NetComm VoIP WiFi Phone V24W User Guide
Auto KeyLock Settings
If you want to automatically lock your keys after 10 seconds of inactivity, select Auto
KeyLock Settings. Press the Edit soft key until Enable is displayed. To unlock your
phone, press the left soft key (Unlock) and the asterisk (*) key.
TIP: To key lock your phone, press and hold the (#) key at the stand by screen.
Factory Default
Factory default will removes all configurations on the V24W phone. And it will bring the
V24W phone back to the factory default settings. Before selecting yes, make sure that you want
to delete all data.
Upgrade
The Upgrade feature allows you to upgrade the firmware of the V24W Phone.
The IP Phone is pre-configured with the correct Download URL (web address of the
download site) and OS Image File (firmware upgrade file) entries.
NOTE: Do not change these settings unless your VoIP Service Provider has
given you new settings.
Plug the USB mini-B connector of the included power adapter into the USB mini-B port of
the IP Phone. Then connect the power adapter to a standard electrical outlet.
NOTE: If the upgrade is interrupted, the V24W Phone will revert to its old
firmware, and you can attempt the upgrade again.
Press the Upgrade soft key to start upgrading the V24W Phone’s firmware, or press the Return
soft key to cancel the upgrade and return to the previous menu.
When the upgrade is complete, the V24W Phone will automatically power itself off. Wait five
seconds and then power it back on.
NOTE: Please do not upgrade the firmware unless instructed by your provider or
NetComm Technical Support.
YML873 V24W User Guide - 28