Filter
Top Products
61
PiN Pocket PC 300 | User Manual
• Type a description for the POI in the Description box.
• On the Degrees, Minutes, Seconds tab, type or select the degree, minute and
second of the POI latitude in the Latitude boxes.
• On the Degrees, Minutes, Seconds tab, type or select the degree, minute and
second of the POI longitude in the Longitude boxes.
3. Repeat step 2 until all POIs have been added to the POI le.
4. On the File menu, click Save. The POI le is saved.
Step 2. Save Custom POI File to your iCN
1. On the File menu, click Save to Device. The POI Options window will open.
2. Modify the POI settings as required:
• To activate the POI select the Active check box. If you do not activate the POI, you
will only be able to congure the Importance and Icon File settings.
• To enable a visual warning when the POI is in close proximity, select the Visual Alert
check box.
• To enable an audible chime when the POI is in close proximity, select the Audio Alert
check box.
• To change the units used to measure distance for this POI, select the Metric or
Imperial option.
• Select the distance from the POI at which the visual warning should display or the
audible chime is heard, from the Distance box.
• Move the POI Visibility Level slider left or right indicate the priority that the POI has
where two or more POIs are in the same locale.
• Type the path to the icon le to be used to represent the POI, in the Icon File box,
or select the icon le from your local or network drive clicking , locating the le
and clicking Open. The le must be a bitmap (.BMP) graphic with a minimum of 6x6
pixels and a maximum of 32x32 pixels.
3. Click
OK and follow the prompts. The POI le is saved to the iCN.
• If you want to change the name of the le, edit the name for the le in the File Name
box of the POI File Name window and click OK. The le name can be up to eight
characters with no spaces.