Filter
Top Products
User’s manual MobileNavigator 6
- 38 - Useful functions
9.2 TMC (Traffic information)
If your device has an integrated TMC receiver, or if you have
connected an external TMC receiver, the navigation system
will have the latest traffic information available. If required, it
can dynamically change your route, e.g. avoid a traffic jam.
The current valid traffic reports are available via the options of
many windows.
1. Tap Options
> Traffic.
The T
RAFFIC INFORMATION window opens.
Above the list, the Displayed Information
button shows
which kind of traffic messaging is listed and the number of
messages received.
2. Tap the Displayed Information
button to select which traffic
messages should be displayed.
For each traffic message, information about the location and
type of congestion will be shown.
Tap a message to display detailed information.
The navigation system can Avoid
( ) or Ignore ( )
congestion on the route. The Alternative Route
button shows
the corresponding status.
Tap the button to select the alternative setting.
Tap the
(Back) button to close the window.
9.3 TMC Settings
1. In the TRAFFIC INFORMATION window, tap on Options >
TMC Settings
.
In the TMC
SETTINGS window you can set and configure the
TMC-sender, this will determine the effect reception of a
message concerning your route will have on it's calculation.
Tuning
Tap the Tuning
button to determine which sender should be
set, from which you want to receive traffic information.
▶ Automatic
: Use the arrow keys of the Station section to
receive another station. The system will search for another
sender if reception becomes poor.