Filter
Top Products
MultiVOIP User Guide T1/E1 Expansion Cards
501
Operation
The MVP2410/3010 front panel has two sets of identical LEDs. In the
MVP2410/3010 without an expansion card, only the left-hand set of
LEDs is functional. However, when the MultiVOIP unit has been
upgraded with an MVP24-48 or MVP30-60 expansion card, the right-
hand set of LEDs will also become active.
Remember that the expansion card must be configured as though it
were simply another complete MultiVOIP unit: it requires its own
T1/E1 line; it requires its own connection to a computer running the
MultiVOIP configuration software. All of the procedures and
operations that apply to the original motherboard of the
MVP2410/3010 will also apply to the expansion card. See applicable
User Guide chapters for details.