Filter
Top Products
MultiVOIP User Guide T1 PhoneBook Configuration
333
Enter Inbound PhoneBook data for your MultiVOIP. The fields of the
Add/Edit Inbound PhoneBook screen are described in the table below.
Add/Edit Inbound Phone Book: Field Definitions
Field Name Values Description
Accept Any
Number
Values: Y/N
Description: When checked, “Any Number”
appears as the value in the Remove Prefix
field.
The Any Number feature of the Inbound
Phone Book does not work when an external
routing device is used (Gatekeeper for H323
protocol, Proxy for SIP protocol, Registrar for
SPP protocol).
When no external routing device is used. If
Any Number is selected, calls received from
phone numbers not matching a listed Prefix
(shown in the Remove Prefix column of the
Inbound Phone Book) will be admitted into
the voip on the channel listed in the Channel
Number field. “Any Number” can be used in
addition to one or more Prefixes.
Remove Prefix dialed di
g
its
p
ortion of dialed number to
be removed before
completing call to destination
(often a local PBX)
Add Prefix dialed di
g
its di
g
its to be added before
completing call to destination
(often a local PBX)
Channel
Number
1-24, or
“Hunting”
T1 channel number to which
the call will be assigned as it
enters the local telephony
equipment
(often a local PBX).
“Hunting” directs the call to
any available channel.
Description -- Describes the facility or
geographical location at
which the call originated.
Call Forward Parameters
Enable Y/N Click the check-box to enable
the call-forwarding feature.