Filter
Top Products
MultiVOIP User Guide Technical Configuration (Analog/BRI)
219
4B. Fixing a Cabling Problem. If the MultiVOIP cannot be located by
the computer, two error messages will appear (saying “Multi-VOIP
Not Found” and “Phone Database Not Read”).
In this case, the MultiVOIP is simply disconnected from the network.
For instructions on MultiVOIP cable connections, see the Cabling
section of Chapter 3.
5. Configuration Parameter Groups: Getting Familiar, Learning
About Access. The first part of configuration concerns IP parameters,
Voice/FAX parameters, Telephony Interface parameters, SNMP
parameters, Regional parameters, SMTP parameters, Supplementary
Services parameters, Logs, and System Information. In the MultiVOIP
software, these seven types of parameters are grouped together under
“Configuration” and each has its own dialog box for entering values.
Generally, you can reach the dialog box for these parameter groups in
one of four ways: pulldown menu, toolbar icon, keyboard shortcut, or
sidebar.