Filter
Top Products
MultiVOIP User Guide Operation & Maintenance
469
2. To invoke the Set Password command, go to Start | Programs |
MVP____ x.xx | Set Password.
3. You will be prompted to confirm that you want to establish a
password, which will entail rebooting the MultiVOIP (which is done
automatically).
Click OK to proceed with establishing a password.
4. The Password screen will appear. If you intend to use the FTP Server
function that is built into the MultiVOIP, enter a user name. (A User
Name is not needed to access the local Windows GUI, the web
browser GUI, or the commands in the Program group.) Type your
password in the Password field of the Password screen. Type this
same password again in the Confirm Password field to verify the
password you have chosen.