Filter
Top Products
MultiVOIP User Guide Operation & Maintenance
445
ISDN BRI Statistics: Field Definitions
(continued)
Field
Name
Values Description
Switch Information:
TEI Assignment
TEI 0
through
TEI 7
0-63
(point-to-point
assignments
)
64-126 (automatic
assignments)
Displays the value for each TEI
assigned to the BRI port. The TEI
(Terminal Endpoint Identifier) uniquely
identifies each device connected to the
ISDN physical layer.
Switch Information:
D-Channel Information
Tx Packets 0 to 4294967295
Shows the number of packets
transmitted on the channel. When the
value exceeds 4294967295 packets, it
will reset to zero and continue
counting.
Rx Packets 0 to 4294967295
Shows the number of packets received
on the channel. When the value exceeds
4294967295 packets, it will reset to zero
and continue counting.
Switch Information:
SPID 0
(SPID 0
number)
numeric,
3 to 20 digits
A SPID (Service Profile Identifier) is
assigned by the ISDN provider and
pertains to one channel of the BRI
interface (port), in this case channel
0. The SPID identifies an ISDN
terminal uniquely. The SPID
associates a set of services (features)
with the terminal. (In Terminal
mode the provider is a telco or PBX.
In Network mode MultiVOIP is the
provider.) A SPID is only used
when the “Country” field is set to
“USA” in the
ISDN BRI Parameters
screen.
Status Not Checked,
Correct,
Incorrect
Indicates whether SPID0 is correct,
incorrect, or not being checked.