Filter
Top Products
- 32 -
PROGRAMMING CALL FORWARDING DEFAULTS
You can create default Call Forward settings that identify where to send your incoming calls if
Call Forward Always is not active.
1. Press Call Forwarding.
2. Press Edit Default.
3. Select the desired type of Call Forwarding:
Busy Internal: forwards internal phone calls after several rings if your line is busy
Busy External: forwards external phone calls after several rings if your line is busy
No Answer Int: forwards internal phone calls redirects your calls after several rings if
you don't answer
No Answer Ext: forwards external phone calls redirects your calls after several rings
if you don't answer
4. Using the telephone dial pad, enter the appropriate number.
5. Press OK.
6. Repeat Step 3 to Step 5 for each Call Forwarding type that you wish to program.
7. Press Save.
This setting is saved. If Call Forward Always is disabled, this setting is activated. If Call
Forward Always is enabled, the default setting is not activated.
8. Press Close twice.
Note: Press Cancel at any time to exit this application without making any changes.