Linksys SPA 900 IP Phone User Manual


 
5-7
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
System Tab
Static IP Settings
Note None of the following parameters apply to the SPA901.
PPPoE Settings
Note None of the following parameters apply to the SPA901.
Optional Network Configuration
Gateway
(SPA901 only)
Default router IP address. Blank if DHCP assigned.
Field Description
Static IP IP address. Blank of DHCP assigned address is used.
Netmask Network mask. Blank if DHCP assigned.
Gateway Default router IP address. Blank if DHCP assigned.
Field Description
PPPoE Login Name Specifies the account name assigned by the ISP for connecting on a Point-to-Point
Protocol over Ethernet (PPPoE) link.
PPPoE Login Password Specifies the password assigned by the ISP for connecting on a Point-to-Point Protocol
over Ethernet (PPPoE) link.
PPPoE Service Name Specifies the service name assigned by the ISP for connecting on a Point-to-Point Protocol
over Ethernet (PPPoE) link.
Field Description
Host Name The host name of the Linksys IP phone.
Domain The network domain of the Linksys IP phone.
Primary DNS DNS server used by Linksys IP phone in addition to DHCP supplied DNS servers if
DHCP is enabled; when DHCP is disabled, this is the primary DNS server.
Defaults to 0.0.0.0.
Field Description