Filter
Top Products
4-13
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 4 SPA900 Series LCD Command Reference
10 Product Info
9.16 Enable VLAN
Shortcut: Setup, 9, 16, y/n, ok
To enable VLAN, press 16 from the Network menu, or scroll down and highlight Enable VLAN and
press the select soft key. Then press the edit soft key and press the y/n soft key to toggle between Yes
and No. After making the selection, press the ok button and the display returns to the Network menu.
9.17 VLAN ID
Shortcut: Setup, 9, 17, VLAN_ID, ok
To edit the VLAN ID, press 17 from the Network menu, or scroll down and highlight VLAN ID and
press the select soft key. Then press the edit soft key. After entering the ID, press ok.
9.18 CDP
Shortcut: Setup, 9, 18, y/n, ok
To enable Cisco Discovery Protocol (CDP), which allows Cisco devices to discover one another
automatically, press 18 from the Network menu, or scroll down and highlight CDP and press the select
soft key. Then press the edit soft key and press the y/n soft key to toggle between Yes and No. After
making the selection, press the ok button and the display returns to the Network menu.
10 Product Info
To view the parameters in the Product Info, press the Setup button and then press 10, or scroll down
until Product Info is highlighted and then press the select soft key. The information displayed cannot
be edited. The options on the Product Info menu are as follows:
• 10.1 Product Name
• 10.2 Serial Number
• 10.3 Software Version
• 10.4 Hardware Version
• 10.5 MAC Address
• 10.6 Client Cert
• 10.7 Customization
10.1 Product Name
Shortcut: Setup, 10, select
To view the Product Name, press the Setup button and press 10, or scroll down to the Product Info
menu, and press the select soft key. The Product Name is also printed on the bottom of the phone.