Filter
Top Products
5-2
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Info Tab
Info Tab
This section describes the fields for the following headings on the Info tab:
• System Information, page 5-2
• Product Information, page 5-2
• Phone Status, page 5-3
Note The fields on this tab are read-only and cannot be edited.
System Information
Product Information
Field Description
DHCP Indicates if DHCP is enabled. Displays Enabled on SPA901, DHCP on other phones.
Current IP Displays the current IP address assigned to the Linksys IP phone.
Host Name Displays the current host name assigned to the Linksys IP phone (defaults to SipuraSPA).
Domain Displays the network domain name of the Linksys IP phone.
Current Netmask Displays the network mask assigned to the Linksys IP phone.
Current Gateway Displays the default router assigned to the Linksys IP phone.
Primary DNS Displays the primary DNS server assigned to the Linksys IP phone.
Secondary DNS Displays the secondary DNS server assigned to the Linksys IP phone.
Field Description
Product Name Model number of the Linksys IP phone.
Serial Number Serial number of the Linksys IP phone.
Software Version Version number of the Linksys IP phone software.
Hardware Version Version number of the Linksys IP phone hardware.
MAC Address MAC address of the Linksys IP phone.
Client Certificate Status of the client certificate, which authenticates the Linksys IP phone for use in the ITSP
network. This field indicates if the client certificate is properly installed in the Linksys IP
phone.
Customization (not applicable
to SPA901)
For an RC unit, this field indicates whether the unit has been customized or not. Pending
indicates a new RC unit that is ready for provisioning. If the unit has already retrieved its
customized profile, this field displays the name of the company that provisioned the unit.
Licenses Indicates any additional licenses that you have installed in the Linksys IP phone.