Filter
Top Products
22 Using Touch2Talk
4. Speak your message while continuing to press the WT button.
5. Release the WT button when finished speaking your message. This
allows the called recipients in the group a chance to reply.
Note: When a T2T call is connected, there is a “no speaker” time-out. If no one
takes the floor of a T2T call for the duration of this time-out, then the T2T
call is disconnected automatically.
6. Press the WT button again to speak.
7. To end the T2T call, press , or select
End Call
from the menu screen.
Adding a member to a T2T group
1. Select
Menu
→
Touch2Talk
→
Manage T2T Groups
→
Add Member
. The
Select
Group
screen appears. Highlight the group you want to add the new
member to.
2. Select
Next
. The
Add Member
screen appears. Highlight the name of the
new member that you want to add to the group.
Note: If no T2T contact names appear, or if the desired contact is not on the
list, then perform steps 5 through 9 of “Creating a T2T Group” on
page 20.