Filter
Top Products
48
Press and hold the VOX key for 2 seconds to turn VOX
Operation mode ON or OFF. Refer to “VOICE
OPERATED TRANSMISSION (VOX)” on page 37 for
details.
• Zone Down (ZN▼)
Press this key to decrease the zone number. Press and
hold this key to cycle down through the zone numbers.
When the lowest zone number is reached, the transceiver
will “roll-over” to the highest zone number and continue
cycling down. After selecting your desired zone, the
channel display will reappear.
• Zone Select
Using the selector, turn clockwise to increase the zone
number and counterclockwise to decrease the zone
number. If a zone has not been programmed, an error
tone will sound.
• Zone Up (ZN▲)
Press this key to increase the zone number. Press and
hold this key to cycle up through the zone numbers.
When the highest zone number is reached, the transceiver
will “roll-over” to the lowest zone number and continue
cycling up. After selecting your desired zone, the channel
display will reappear.