Filter
Top Products
46
• Selcall (SEL)
Press this key to enter Selcall mode. Press and hold this
key to enter Stack mode. Refer to “FleetSync:
ALPHANUMERIC 2-WAY PAGING SYSTEM” on page 26
for details.
• Selcall Status (SES)
Press this key to enter Selcall mode. Press and hold this
key to enter Stack mode. Refer to “FleetSync:
ALPHANUMERIC 2-WAY PAGING SYSTEM” on page 26
for details.
• Speaker Attenuation
Press this key (on the optional speaker/microphone) to
attenuate the received voice signals. This reduces the
strength of the speaker output to cut back any noise and
distortion present in the signal.
• Squelch Level (SQL)
Press this key to adjust the transceiver squelch level.
When adjusting the squelch level, use the Side 2 and
Side 3 keys or the D> and <C keys to increase and
decrease the squelch level.
The squelch level can be adjusted from 0 (open) to 9
(tight). The default setting is 1.
• Squelch Off (MON)
Press this key to turn the transceiver squelch off. This will
allow you to better hear weak signals on your selected
channel, as well as background noise. While squelch is off,
the
icon appears on the display. Press the Squelch Off
key again to turn the transceiver squelch back on.
• Squelch Off Momentary (MON)
Press and hold this key to momentarily turn the
transceiver squelch off. Releasing this key turns the
transceiver squelch back on. While squelch is off, you can
better hear weak signals on your selected channel, as well
as background noise. While squelch is off, the
icon
appears on the display.