Filter
Top Products
40
ADVANCED OPERATIONS
Your transceiver operations vary according to the functions
that your dealer has programmed onto the transceiver keys.
Following is brief overview of the programmable functions.
Refer to those functions which have been programmed onto
your transceiver.
• Autodial (AD)
Press this key to quickly call a DTMF number that has
been pre-stored in your transceiver memory. When
viewing the Autodial list, press the <C and D> keys to
select your desired number, then press the PTT switch to
make the call. Refer to “A
UTODIAL” on page 31 for details.
• Battery Status (BAT)
Press this key to view the battery power status. The
battery power status is represented by the number of
times the LED indicator flashes red. Five flashes
represents high power, 4 represents medium power, 3
represents low power, and 2 represents very low power. If
the LED flashes red only 1 time, recharge or replace your
battery pack immediately.
When the Low Battery Warning function is active {page 50}
and the battery power is low, this key will not operate.
• Call Response (RES)
Press this key to respond to an Individual call.
• Channel Down (CH▼)
Press this key to decrease the channel number. Press
and hold this key to cycle down through the channel
numbers. When the lowest channel number is reached,
the transceiver will “roll-over” to the highest channel
number and continue cycling down.
• Channel Recall (RCL)
Press this key during Scan to return to the last called zone
and channel.