Kenwood TK-5210 Two-Way Radio User Manual


 
47
Status (STS)
Press this key to enter Status mode. Press and hold this
key to enter Stack mode. Refer to “FleetSync:
ALPHANUMERIC 2-WAY PAGING SYSTEM” on page 26
for details.
•Tactical Group (TAC)
Press and hold this key for 1 second to register the
selected channel as a Tactical Group channel. Press and
hold this key for 3 seconds to register all channels within
the current zone as Tactical Group channels.
•Talk Around (TA)
Press this key to toggle Talk Around ON and OFF. Talk
Around redirects the transceiver signals directly to other
party members rather than relaying the signals through a
repeater. When activated, the
icon appears on the
display.
While using Talk Around, you free up the repeater and
communicate directly to other transceivers that are within
range. If the other party is too far away, you must
continue to use the repeater to engage in communication.
•Talkgroup (TGR)
Press this key to select the Group ID list. You can then
select the ID of the group you want to call. Refer to
“M
AKING GROUP CALLS” on page 21 for details.
•Tone (TON)
Press this key to turn the transceiver audible tones off.
When active, you will no longer hear tones from the
transceiver. Press this key again to turn the audible tones
back on.
VOX (VOX)
Press this key to adjust the external microphone VOX
level. When adjusting the VOX level, use the
Side 2 and Side 3 keys or the D> and <C keys to increase
and decrease the VOX Gain level. The VOX Gain level
can be adjusted from 1 to 10.