Filter
Top Products
26
FleetSync is an Alphanumeric 2-way Paging Function, and is
a protocol owned by KENWOOD Corporation. FleetSync
enables a variety of paging functions on your transceiver,
some of which depend on dealer programming.
Note: This function is available only in Conventional FM Operation.
SELCALL (SELECTIVE CALLING)
A Selcall is a voice call to a particular station or to a group of
stations.
■ Transmitting (K2 and K3 Models Only)
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or
Selcall Status to enter Selcall mode.
3 Press the Side 2 and Side 3 keys to select the ID of
the station you want to call.
• On K3 model transceivers, if Manual Dialing is enabled,
you can enter the station ID by using the DTMF keypad.
4 Press the PTT switch and begin your conversation.
• Alternatively, you can press the <C key to page the
selected station, rather than making a voice call.
■ Receiving
An alert tone will sound, the transceiver will automatically
enter Selcall Mode, on K2 and K3 model transceivers, the
calling station’s ID will appear when a Selcall is received.
When the call station’s ID appears on the display, you can
respond to the call by pressing the PTT switch and
speaking into the microphone.
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION