Filter
Top Products
22
RECEIVING
1 Select the desired zone and channel using the selector
knob and the Zone Up/ Zone Down or Channel Up/
Channel Down keys. (If the Scan function has been
programmed, you can switch it on or off as desired.)
2 When you hear a caller’s voice, readjust the volume as
necessary.
• If signaling has been programmed on the selected channel,
you will hear a call only if the signal tone matches the tone
set up on your transceiver.
Note: Signaling allows your transceiver to code your calls. This
will prevent you from listening to unwanted calls. It does not
make calls private, it only prevents them from being heard by
transceivers set with a different signaling code. Refer to
“SIGNALING” on page 35 for details.
■ Receiving Group Calls (APCO)
When you receive a call on your group channel and the
received group ID matches the ID set up on your
transceiver, you can hear the caller’s voice. Readjust the
volume as necessary.
■ Receiving Individual Calls (APCO)
When you receive an individual call, a ringing tone will
sound and on K2 and K3 model transceivers, the display
will show the caller’s ID. To respond to the call, press and
hold the PTT switch and speak into the transceiver as you
would during a normal transmission.