Kenwood TK-5210 Two-Way Radio User Manual


  Open as PDF
of 60
 
9
INSTALLING THE CAP OVER THE UNIVERSAL CONNECTOR
1 If you are not using an
optional speaker/
microphone or headset,
install the cap over the
universal connector.
2 Secure the cap in place
using the attached screw.
Universal
connector cap
INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE OR HEADSET
Optional
speaker/ microphone
1 Insert the guide of the
speaker/ microphone or
headset connector into the
groove of the universal
connector.
2 Secure the connector in
place using the attached
screw.
Note: When not using an optional
speaker/ microphone or headset,
install the cap over the universal
connector.
 previous next