Filter
Top Products
35
SIGNALING
Note: Signaling can be used only in Conventional FM Operation.
QUIET TALK (QT)/ DIGITAL QUIET TALK (DQT)
Your dealer may have programmed QT or DQT signaling on
your transceiver channels. A QT tone/ DQT code is a
sub-audible tone/code which allows you to ignore (not hear)
calls from other parties who are using the same channel.
When a channel is set up with a QT tone or DQT code, squelch
will only open when a call containing a matching tone or code is
received. Likewise, signals that you transmit will only be heard
by parties whose QT/ DQT signaling matches your transceiver.
If a call containing a different tone or code is made on the
same channel you are using, squelch will not open and you
will not hear the call. This allows you to ignore (not hear)
these calls. Although it may seem like you have your own
private channel while using QT/ DQT, other parties can still
hear your calls if they set up their transceiver with the same
tone or code.
■ OPERATOR SELECTABLE TONE (OST) (K2 AND K3 MODELS ONLY)
If a key has been programmed with Operator Selectable
Tone, you can reprogram the QT tone or DQT code on
each of your channels.
1 Select your desired channel.
2 Press and hold the key programmed as Operator
Selectable Tone for 1 second.
• The icon appears on the display.
3 Press the Side 2 and Side 3 keys or the D> and <C
keys to select your desired tone or code from 1 to 40.
4 Press the Side 1 key to save your new setting.