Filter
Top Products
GETTING STARTED
29
Model 8560 Display Phone and Model 8660 IP Phone User Guide
USING A HEADSET
With an electret headset, you can talk on the phone handsfree, without using your
speaker and microphone.
NOTE: If your headset has a power-saver mode, make sure the System Administrator
has the Headset Connect Tone flag enabled in the telephone system. If this flag is not
enabled, you may miss the first few seconds of incoming calls.
To connect a headset:
1. Insert the headset plug into the headset jack.
2. With the handset in the cradle, dial (Headset On feature code) or dial
(Headset On/Off feature code). The display shows HEADSET MODE
ON.
NOTE: If using a headset, press to connect and disconnect calls.
To disconnect a headset:
1. Unplug the headset cord from the headset jack.
2. With the handset in the cradle, dial (Headset Off feature code) or dial
(Headset On/Off feature code). The display shows HEADSET MODE
OFF.
NOTE: If you have both a headset and handset connected to your phone and you are
using the headset, you can quickly transfer audio to the handset by lifting the handset
from the cradle. Press to transfer the call back to the headset before replacing the
handset in the cradle.
3
1
5
3
1
7
3
1
6
3
1
7