Filter
Top Products
4
FINDING YOUR WAY
Model 8560 Display Phone and Model 8660 IP Phone User Guide
Feature Key Functions
The feature keys are designed to automate some of the commonly-used functions,
such as dialing an outside number. Each of these is described in the table below.
In addition to the keys identified in the preceding table, your phone has a Special key
( ). Depending on how your telephone system is configured, you may need to press
this key before you dial a feature code.
NOTE: Because the Axxess telephone system allows customized feature keys, your
phone may have been reprogrammed so that the feature keys do not match those
described in this guide.
KEY IF YOU... YOU CAN... PG.
Press Answer a call. 17, 20
Press and dial the number Place an outgoing call. 19
or LINE
Press an unlit
key or the flashing
key
Select an outside line or answer a
call.
19, 20
Press Access an intercom call. 17
Press unlit or lit Enable/disable Do-Not-Disturb mode. 39
Press
and dial the numbers you
would like to add to the conference
Place a conference call. 22
Press (International Hold Symbol) Put a call on hold. 21
Press and dial the destination
number
Transfer a call. 23
Press View or access System Speed-Dial
numbers.
53
Press View or access Speed-Dial numbers. 52
Press Choose a page zone to place a page. 55
Press Redial a telephone number or save
the last number dialed.
27
Press and hang up Put a call on the speaker. 30
Press Leave or listen to a message. 32
Press Mute the microphone. 30
Press
and dial the destination num-
ber
Forward calls to the specified num-
ber.
25
Press the high or low end of the Volume key Adjust volume during a call. 44
ANSWER
ANSWER
OUTGOING
OUTGOING
CALL
CALL
IC
IC
DND
DND
CNF
CNF
TRANSFER
TRANSFER
SYS SPDL
SYS SPDL
STN SPDL
STN SPDL
PAGE
PAGE
REDIAL REDIAL
MSG
MSG
MUTE
MUTE
FWD FWD