Filter
Top Products
22
GETTING STARTED
Model 8560 Display Phone and Model 8660 IP Phone User Guide
PLACING CONFERENCE CALLS
With the Conference feature, you can establish a conference call with up to three
intercom and/or outside parties (four, including you).
To place a conference call:
1. While on the first call, press or the CNF menu key to put the call on
hold.
2. Place another intercom or outside call.
3. Press or the CNF menu key to place the call on hold. (If necessary, repeat
this step to place one more call on hold.)
4. Press or the CONNECT TO CONFERENCE menu key to join all of
the calls together in the conference.
During the conference call, you can do the following:
• To place the conference on hold: Press the HOLD menu key. This places the con-
ference on hold without disconnecting the parties. To return to the conference,
press .
• To drop out of the conference: Press and hang up. This removes your
phone from the conference, but leaves the other parties connected.
• To add additional parties to the conference: Do the following:
a. Press the ADD PARTY menu key. This leaves the conference parties con-
nected.
b. Place a call to the party to be added to the conference.
c. EITHER, Press twice.
OR, Press once, and then press CONNECT TO CONFERENCE.
You and the new party are added to the conference.
• To end the conference and place all parties on individual hold: Press and
then press to place all of the parties on individual hold. You can then speak to
one party at a time by pressing the Hold key or a flashing key.
• To mute your microphone: Press
or the MUTE menu key. This turns your
microphone on or off during the conference. If mute is enabled, you can hear the
conferenced parties, but they cannot hear you.
• To transfer the conference to another extension or to voice mail: Press
or the TRANSFER CNF menu key and dial the desired extension number. Then
hang up when you are ready to complete the transfer.
CNF
CNF
CNF
CNF
CNF
CNF
CNF
CNF
MUTE
TRANSFER