Filter
Top Products
26 Getting Started
1.4 Starting Up
After inserting your USIM/SIM card and battery and charging the battery,
you can now power on and start using your device.
Turn your device on and off
To turn on the power
• Press and hold the POWER button for a few seconds.
When you turn on your device for the first time, a Quick Start Wizard
guides you through the calibration process and the setup of regional
settings, date and time, and password. For more information about
touch screen calibration, see “Calibrate the device” later in this
chapter. After the Quick Start Wizard finishes, the device installs
customization settings, and then the device will restart.
Note After the device restarts, you may be prompted to set up an e-mail
account. Refer to Chapter 7 for details.
To turn off the power
• Press and hold the POWER button for a few seconds.
A message prompts you to choose whether or not to turn off the
device completely.
Auto configure the data connection settings
The first time you power on your device,
you will see a notification message from
Connection Setup on the Today screen.
Connection Setup automatically configures
your device’s data connections, such as GPRS,
WAP, and MMS, so that you do not need to
enter the settings manually for your device.