HP (Hewlett-Packard) iPAQ hw6500 PDAs & Smartphones User Manual


 
Using the Phone Features 5–9
b. Use Display to adjust backlight brightness and set a timer to
turn off the backlight, if HP iPAQ is not used.
c. Use Power to set a timer to turn off the power if HP iPAQ is
not
used.
d. Use Wireless to keep wireless settings On or Off (Phone
and
Bluetooth).
5. Tap OK when you have finished setting the profile.
6. Tap Yes to save your changes to the selected profile.
Switching a Profile
To quickly switch a profile from within any application:
1. Press and hold the Power button to bring up the quick
access
menu.
NOTE: The quick access menu includes five tasks and a shortcut to Profile
Settings, in addition to the profile selections that allow you to switch tasks.
2. Tap the desired profile.
NOTE: The quick access menu disappears after 10 seconds.
NOTE: When the Backlight is adjusted to its lowest setting, it cannot be
turned on from the quick access menu. It can only be turned back on by
accessing the Start menu > Settings > System tab > Backlight >
Brightness tab and adjusting the brightness level. The brightness level
can also be accessed from the battery icon if the TodayPanel
is displayed.
Making and Receiving Phone Calls
You can now make local or long distance domestic calls and, if you
requested the setup, you can also make international calls.