Filter
Top Products
Installing and Configuring PPU Software
Installing PPU Software
Chapter 3 27
Step 4. Mount the drive to the desired directory. The following example uses the
/dev/dsk/c1t2d0 device file (from
Step 2, above) and the /cdrom
directory. To mount the drive, enter a similar command as:
Mount Example:
mount -r /dev/dsk/c1t2d0 /cdrom
Step 5. Install the PPU B.06.x bundle T2351AA from the OE CD/DVD:
swinstall -s /cdrom T2351AA
Step 6. Continue with “Configuring PPU Software” on page 29.
For HP-UX 11i v1 or 11i v2 - Installing from the AR
Media
Follow this procedure to install the PPU B.06.x software on your HP-UX
11i v1 or 11i v2 system:
Step 1. Log in as root.
Step 2. Determine the CD/DVD drive device file by entering the following
command:
ioscan -fnC disk
Step 3. Insert the Applications Software CD/DVD into the drive.
Step 4. Mount the CD/DVD drive to the desired directory. The following example
uses the /dev/dsk/c1t2d0 device file (from
Step 2, above) and the
/cdrom directory. To mount the drive, enter a similar command as:
Mount Example:
mount -r /dev/dsk/c1t2d0 /cdrom
Step 5. Install the PPU B.06.x bundle T2351AA from the CD/DVD:
swinstall -s /cdrom T2351AA
Step 6. Continue with “Configuring PPU Software” on page 29.