Filter
Top Products
Understanding PPU Requirements
PPU Software Requirements
Chapter 2 19
PPU Software Requirements
PPU systems are required to run the PPU software on every partition
which reports information to the utility meter (located on your network).
If your PPU system does not send usage reports, via the https client,
your system’s processors may be assumed to be 100% utilized.
Your PPU system is shipped with the correct version of HP-UX and the
PPU software bundle. In the event your system’s operating system is
re-installed with Ignite-UX, ensure that the correct version of HP-UX is
used and the PPU software is installed. See “Getting Started” on page 24
for details.
IMPORTANT This document lists the patches required to install and run PPU versions
B.06.x known at the time of publication. To find the most current
patches, see “How To Find The Latest Patches” on page 26 for detailed
instructions.
HP-UX 11i v2 Requirements
For PPU Versions
B.06.x on
HP-UX 11i v2
The following software is required for PPU versions B.06.x on HP-UX 11i
v2:
❏ HP-UX 11i v2
❏ PPU software bundle T2351AA (version B.06.x) located on the
following HP web site (search for “T2351AA”):
software.hp.com
❏ Kernel driver diag2
❏ nPar bundle
❏ WBEM B8465BA bundle