Filter
Top Products
9
Handset Sound Signals
Signal Meaning
A long warbling tone Signals an incoming call
(with ringer on)
Three short beeps Page signal
(several times)
Single beep every 7 seconds Low battery warning
Troubleshooting Guide
Cordless Phone Solutions
No Display
• The battery must be fully charged. Try replacing the
battery.
Registration will not work
• The battery must be fully charged. Charge the battery for
16 hours.
• Make sure that the unit is connected to a non-switched
electrical outlet. Disconnect the unit from the wall and plug
it in again.
• You must be subscribed to Caller ID service from your local
telephone company in order to receive Caller ID records.
Telephone Solutions
No dial tone
• Check installation:
Make sure the base power cord is connected to a working
electrical outlet.
Make sure the telephone line cord is connected to the base
unit and the wall phone jack.
• Connect another phone to the same modular jack; if the
second phone doesn’t work, the problem might be with
your wiring or local service.
• The handset may be out of range of the base. Move closer
to the base.
• Make sure the battery is properly charged (for 16 hours).
• Ensure the battery pack is installed correctly.
• The handset should beep when you press the talk button,
and the charge indicator on the base should be lit when
the handset rests in the cradle. If not, the battery may need
to be charged.