Filter
Top Products
1
Base Station
1. Choose an area near an electrical outlet and a telephone
wall jack (RJ11C), and place your telephone base on a level
surface, such as a desktop or tabletop.
. Plug one end of the telephone line cord into the TEL LINE jack
on the bottom of the base and the other end into a modular
jack.
. Plug the AC power converter into the electrical outlet and the
DC connector into the jack on the bottom of the base.
4. Place the handset in the cradle on the base.
5. The charge indicator illuminates, verifying the battery is
charging. The unit will take 0 seconds to register and verify
its security code.
6. Allow the phone to charge for 16 hours prior to rst use. If
you don’t properly charge the phone, battery performance is
compromised.
CAUTION: To reduce risk of personal injury,
re, or damage use only the 5-2822 (for base
unit) and 5-2718 (for handset charger) power
adaptor listed in the user’s guide. This power
adaptor is intended to be correctly orientated
in a vertical or oor mount position.