GE 28225 Cordless Telephone User Manual


 
7
If you choose Delete All:
1. Press the
OK (SKL) button to delete the entry, and the screen
displays “Delete All?”.
. Press the
Yes (SKL) button to conrm.
If you choose User Number:
Press OK (SKL) button to view user number, you may then redial
the number or save it to Calls List or Phone Book
Changing the Batteries
CAUTION: To reduce the risk of re or personal
injury, use only the Thomson Inc. approved
Model 5-2825 NiMH 1.2V 600mAh rechargeable
batteries, that are compatible with this unit.
1. Make sure the telephone is OFF (not in TALK mode) before
you replace the batteries.
. Remove the batteries compartment door.
. Disconnect the cord attached to the batteries and remove
the batteries from the handset.
4. Insert the new batteries and connect the cord to the jack
inside the batteries compartment.
5. Put the batteries compartment door back on.
6. Place handset in the base to charge.
Allow the handset
batteries to properly charge (for 16 hours) prior to rst
use or when you install the new batteries. If you do not
properly charge the phone, the batteries performance will
be compromised.
Battery Safety Precautions
Do not burn, disassemble, mutilate, or puncture. Like other
batteries of this type, toxic materials could be released which
can cause injury.
To reduce the risk of re or personal injury, use only the
battery listed in the User’s Guide.
Keep batteries out of the reach of children.
Remove batteries if storing over 0 days.
NOTE: The RBRC seal on the battery used in your Thomson Inc. product
indicates that we are participating in a program to collect and recycle the
rechargeable battery (or batteries).
For more information go to the RBRC web site at www.rbrc.org
or call 1-800-8-BATTERY or contact a local recycling center.