GE 28225 Cordless Telephone User Manual


 
0
NOTE:
1. Once the registration procedure is complete,
the handset will automatically be allocated the
next available handset number.
2. Once the Page button is pressed and held
for more than 10 seconds on a base station,
the base stays in registration mode for approx.
2 minutes. While the handset searches for an
available base station, the screen displays
SEARCHING.
Deregister Handset
WARNING: It is not recommended that a handset
be deregistered unless absolutely necessary
because once a handset is deregistered, that
handset’s telephone features cannot be used
until the handset is re-registered.
1. Use the
or button to scroll to Deregister HS through
the submenu Registration.
. Press the
OK (SKL) button.
. If necessary, use the
or button to select the handset
and press OK (SKL) button. “Deregister HS?” shows in the
display.
4. Press the
OK (SKL) button to conrm.
Select Base
1. Use the
or button to scroll to Select Base through
the submenu HS Settings.
. Press the
OK (SKL) button.
.
Use the
or button to select a specic base.
4. Press the
OK (SKL) button to conrm the selection.
Tones ON/OFF
1. Use the
or button to scroll to Tones ON/OFF through
the submenu HS Settings.
. Press the
OK (SKL) button.
.
Use the
or button to choose Key tone, Battery Low
and Out of Range.
4. Press the
OK (SKL) button.
5.
Use the
or button to select OFF or ON.
6. Press the
OK (SKL) button to conrm the selection.
7. Repeat steps -6 as needed.