7
Handset Operation
Making a Call
Pre-Dialing:
1. Dial the telephone number. Use the Clear (SKR) button to
delete any incorrect entries.
OR
Use the
,
,
or mem button to select desired number,
press the More (SKL) and scroll to Use Number.
. Press the
/ash button. It will start counting when the call
is connected, the call timer format is HH:MM:SS.
. Press the
/end button to terminate the call.
Dialing:
1. Press the /ash button and wait for the dial tone.
. Dial the telephone number as required. It will start counting
when the call is connected, the call timer format is HH:MM:
SS.
OR
Press the
MORE (SKL) button to choose from Redial, Calls
List, or Phone Book, press the OK (SKL) button.
. Use the
,
or ,
button to select desired number,and
press the OK (SKL) button.
4. Press the
/end button to terminate the call.
NOTE: During the conversation, you can use
or
button to adjust the speaking volume (5
levels).
Receiving a Call
When an external call is received, all handsets registered and
the base station ring , and
ashes in the handset display. If
congured, the telephone number of the caller appears (network
depended). If the caller has been entered in your phone book, the
name appears. On the base, the blue charge/in use indicator will
ash according to the ring cadence.
1. Press the
/ash button to establish the connection.
NOTE: If auto answer is enabled, the call is
connected when the handset is lifted from the
base.
. Press the /end button to terminate the call.