Filter
Top Products
Redialing
The phone stores the last 10 numbers dialed in the redialling
memory.
1. Press the
button to view the dialed calls.
. Use the
or button to select the desired record.
. Press the
/ash button to redial the desired record.
4. Press the
/end button to terminate the call.
Changing the Earpiece Volume
Press the
or button as often as necessary to change the
earpiece volume during a call.
Handset Speaker Phone
Press the
button to activate/de-activate the handset speaker.
Muting the Microphone
Press the </mute button to mute your connection, the screen
displays the
icon. To cancel and return to normal connection,
press the </mute button again.
DND (Do Not Disturb)
The do not disturb feature (DND) allows you to mute the ringer of
all registered handset(s) at the same time. The phone must be in
standby mode. Press the DND button on the base, you will hear
a conrmation tone, and the DND LED illuminates. To cancel the
DND feature, press the DND button again. You can also mute
the ringer tone while the phone is ringing by pressing the DND
button on the base.
Muting the Ringer during an Incoming Call
Press the /end button during an Incoming call to stop the ring
on the handset. Your answering system will continue to monitor
the ring.
Disabling the Ringer on the Handset
Press the and hold the */tone/ringer
button for 1.5 seconds in
idle mode to activate or deactivate the handset Ringer. The
icon turns ON or OFF.