Filter
Top Products
9
Paging the Handset
If a handset has been misplaced, it is possible to call all the
handsets. The handset will ring at full volume regardless of
any programmed pre-set.
1. Press the
page button briey on the base station.
To stop the page call:
1. Quickly press and release the
/ash, /end, or
button on the handset or page button on the base.
Key Lock
Press the and hold the
button for seconds to activate or
de-activate the key lock.
When handset keys are locked, you are still able to receive
incoming calls by pressing the /ash button.
Intercom Operation
Making Intercom Calls
If more than one handset is registered on the base station, it is
possible to make intercom calls between the handsets.
1. Press the
INT (SKR) button.
. Use the
or
button to select the required handset
(Handset 1 or Handset ).
. Press the
OK (SKL) button to initiate the conversation.
4. Press the
/end button to end the call.
NOTE: During the conversation, you can use
or
button to adjust the speaking volume (5
levels).
Receiving Intercom Calls
When an intercom call arrives, the handset rings and displays
the caller’s handset number.
ashes in the handset display.
1. Press the
/ash button to establish the connection.
NOTE: If auto answer is enabled, the line can also
be automatically connected after the handset is
lifted up from the base.
. Press the /end button to terminate the call.