Filter
Top Products
34
NOTE: If the battery is not properly installed in the handset, or if the battery
pack is not properly connected to the jack inside the battery compartment. “NO
BATTERY” shows in the display when the handset is placed in the charging cradle.
Battery Safety Precautions
• Do not burn, disassemble, mutilate or puncture. Like other batteries of this
type, toxic materials could be released which can cause injury.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
Belt clip and Optional Headset
Connecting the Belt Clip
1. To attach the belt clip, insert the sides of the belt clip
into the slots on each side of the handset.
2. Snap the ends of the belt clip into place.
Connecting an Optional Headset
to the Handset
Each handset can be used with an optional
headset hands free operation.
1. Connect the headset to the headset jack on
the side of the handset The handset receiver
and microphone are disabled when the
headset is connected.
2. Adjust the headset to rest comfortably on top
of your head and over your ear. Move the
microphone to approximately two to three
inches from your mouth.
3. Press the TALK/CALLBACK button to answer a call
or make calls using the headset.
4. To return to normal operation, unplug the headset from the jack.
Headset jack
Headset Plug
Belt clip
Slot for
belt clip
Slot for
belt clip