Filter
Top Products
19
1. Press and hold the page button on the base until the CHARGE/IN USE
indicator on the base flashes.
2. Press and hold the page button on the base again until the CHARGE/IN USE
indicator on the base flashes rapidly.
3. Press and release the page button on the base once. All handsets are de-
registered and HANDSET NEEDS REGISTRATION shows in the display.
Default Setting
As you become familiar with this system, you may prefer to use the system’s
original settings. Follow the steps below to return to the factory default settings.
1. Press the CALLER ID-VOL (- or +) button to scroll to the DEFAULT SETTING menu.
2. Press the MUTE/PROG button to enter the menu. DEFAULT SETTING 1YES
2NO shows in the display.
3. Use the touch-tone pad to select 1 YES or 2 NO, or use the CALLER ID-VOL (- or
+) button to move the cursor to 1 YES or 2 NO. 2 NO is default setting.
NOTE: If you choose “YES” all the settings in the programmable menu are
returned to factory default setting.
4. Press the MUTE/PROG button to save your selection. You will hear a
confirmation tone.
Telephone Operation
Charge Indicator
When the CHARGE/IN USE indicator on the base is lit, the handset is correctly
seated in the cradle and is charging.
NOTE: The CHARGE/IN USE indicator on the base is also lit when the handset
is in use.
Making Calls
1. Pick up the handset, and press the TALK/CALLBACK button. Listen for a dial tone.
2. Dial the number you want to call, or dial the number first then press the
TALK/CALLBACK button.
3. When finished, press the TALK/CALLBACK button to hang up.