Filter
Top Products
26
NOTE: A handset can enter conference mode directly by pressing TALK/
CALLBACK on the second handset during a call.
Transferring External Calls to Other Handsets
During an external call, you may transfer the external call to another handset.
1. Press the INT button on the originating handset to put an external call on
hold, and then page the receiving handset.
2. Use the touch-tone pad on the handset to select Handset number (1, 2, 3 or
4). You will hear a paging tone. PAGING shows on the originating handset’s
display, and PAGING FROM... shows on the receiving handset’s display.
3. When the receiving handset connects, press the TALK/CALLBACK button on
the originating handset to transfer the call.
-OR-
4. Press the TALK/CALLBACK button on the originating handset to
transfer the call. If the receiving handset does not answer within 30
seconds, the originating handset rings back and displays CALLBACK.
If the originating handset does not answer within 20 seconds, the call
is automatically dropped.
Memory
You may store fifty 15-character names and 20-digit telephone numbers in the
handset memory.
Storing a Name and Number in Memory
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEMORY button to display SELECT MEMORY 01-50
.
3. Press the desired memory location button (01 through 50) or use the
CALLER ID-VOL (- or +) button to scroll to desired the memory location.
NOTE: If the memory location is occupied, the memory location number and
stored name and telephone number appear in the display. If the memory location
is empty, “EMPTY” appears in the display.
4. Press the MEMORY button. The display shows ENTER NAME.
5. Use the touch-tone pad to enter a name (up to 15 characters). More than one
letter is stored in each of the number keys. For example, to enter Bill Smith,