Filter
Top Products
33
3. Press the DELETE button. The display shows DELETE CALL ID?
4. Press the DELETE button to erase the record showing in the display. The
display shows DELETED.
NOTE: Press the *EXIT key to return to the standby mode.
Deleting All CID Records
1. Make sure the phone is OFF (not in talk mode).
2. Use the CALLER ID-VOL (- or +) button to scroll to any CID record.
3. Press and hold the DELETE button until DELETE ALL? shows in the display.
4. Press DELETE button to erase all of the current CID records. The display
shows DELETED followed by NO CALLS.
NOTE: Press the *EXIT key on the handset to return to the standby mode.
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only the battery
5-2660 that is compatible with this unit.
1. Make sure the telephone is OFF (not in talk
mode) before you replace battery.
2. Remove the battery compartment cover.
3. Disconnect the cord attached to the battery
pack from the jack inside the battery
compartment and remove the battery pack
from the handset.
4. Insert the new battery pack and reconnect
the battery plug.
5. Put the battery compartment cover back on.
6. Place handset in the base to charge. If
you don’t charge the handset battery
properly (for 16 hours) when you first set
up the phone and/or when you install a
new battery pack, the battery ’s long-term
performance will be compromised.
Battery
pack plug
Battery compartment jack
Battery pack
Battery
compartment