Filter
Top Products
15
5. Press the MUTE/PROG button to save your selection. You will hear a
confirmation tone and the selected ringer tone shows in the display.
Ringer Volume
1. Press the CALLER ID-VOL (- or +) button to scroll to the RINGER VOLUME menu.
2. Press MUTE/PROG button to enter the menu. SET RINGER 1HI 2LOW 3OFF
shows in the display.
3. Use the touch tone pad on the handset to select 1, 2 or 3, or use the CALLER
ID-VOL (- or +) button to scroll to your selection. HI is the default setting.
4. Press the MUTE/PROG button to save your selection. You will hear a
confirmation tone and the new volume setting shows in the display.
NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.
VIP Melody
This features allow you to assign a specific melody to someone you want to get
your attention when the person calls. When a VIP melody is assigned and that
person calls, the unit rings the normal ring for the first ring and then follows with
VIP melody ring. You may choose from ten different polyphonic melodies and may
store up to 10 VIP records.
NOTE: This feature ONLY works when the following conditions are met.
1. You have subscribed to Caller ID.
2. You have your Caller ID record previously transferred to the memory. (Refer to
Storing CID Records in Internal Memory). “NO USER MEMORY” will show in the
display to remind the user to do CID record transfer first.
Storing VIP Melody
1. With handset in standby mode.
2. Press MUTE/PROG button once to display the submenus: ROOM
MONITOR and HANDSET SETUP.
3. Press the CALLER ID-VOL (- or +) button to scroll to the HANDSET SETUP
.
4. Press MUTE/PROG button to enter into this HANDSET SETUP.
5. Press the CALLER ID-VOL (- or +) button to scroll to VIP MELODY submenu.
6. Press MUTE/PROG button to select VIP melody feature and then display
VIP 1 record.
- If VIP1 does NOT contain any specific number/records, it will display EMPTY
.