Filter
Top Products
24
Do Not Disturb (DND)
DND allows you to turn off the ringer on all handsets at once, even though the
handsets have been set to HI or LOW.
In the standby mode, press the DO NOT DISTURB button on the base. The DND
backlit indicator will light and DO NOT DISTURB shows in handset display.
To cancel, press DO NOT DISTURB again.
Intercom Operation
(This is only applicable with addition of Model 25832A optional handset.)
The intercom feature allows you to have a conversation with another
registered handset without tying up the telephone line. And since the
telephone line is not in use, you may still receive incoming calls.
Making an Intercom Call
1. Make sure the phone is OFF (not in talk mode).
2. Press the INT button on the handset.
3. Use the touch-tone pad to select the handset you want to page.
NOTE: To cancel page, press the INT button again or the *EXIT button on the
sending handset.
4. Wait for the person at the receiving handset to press the INT button.
NOTE: If the receiving handset does not answer within two minutes, the
intercom call is automatically canceled. The originating handset displays
“NO ANSWER”
.
5. When finished, press the *EXIT button or INT button on either handset to
deactivate the intercom.
NOTE: The system is expandable up to 4 handsets (by purchase of optional Model
25832A handset with recharge cradle). When 4 handsets are registered, the system can
handle 2 separate intercom operations at once, for example, 1st handset intercoms
with 2nd handset while 3rd handset intercoms with 4th handset.
Receiving an Intercom Call
When you receive an intercom call, your handset beeps. To answer the call
press the INT button or TALK/CALLBACK button.