Filter
Top Products
23
shows in the display.
3. Use the touch-tone pad to enter the handset number you want to page.
4. To cancel the page, press the *EXIT or INT button on the originating
handset, or press the TALK/CALLBACK button on the receiving handset.
Paging All Handsets from a Handset
(This is only applicable with addition of Model 25832A optional handset.)
1. Make sure the originating phone is OFF (not in talk mode).
2. Press and release the INT button on a handset. PAGING EXTENSION?
shows in the display.
3. Use the touch-tone pad to enter the handset number you want to page. (1= to
page Handset 1, 2=to page handset 2, etc., and 5=to page all handsets)
4. To cancel the page, press the *EXIT or INT button on the receiving handset,
or you may press TALK/CALLBACK on the originating handset.
Paging from the Base/Group Page
(This is only applicable with addition of Model 25832A optional handset.)
Use the base-only to page all registered handsets at the same time.
1. Press the page button on the base. All handsets beep for two minutes, and
PAGING FROM BASE shows on each handset’s display.
2. To cancel the page, press the page button on the base, or press the TALK/
CALLBACK button or the *EXIT button on each handset.
Mute
To have a private, off-line conversation, use the MUTE feature. The party on the
telephone line cannot hear you, but you can hear them.
1. Press the MUTE/PROG button. The handset display shows MUTE ON.
2. Press the MUTE/PROG button to cancel and return to your phone conversation.
Receiver Volume Control
When the handset is ON (in talk mode) you may adjust the receiver volume by
pressing the CALLER ID-VOL (- or +) button. There are four volume levels to
choose from. When the maximum or minimum volume level is reached, the
phone beeps twice. VOL 1 is minimum and VOL 4 is maximum.