Filter
Top Products
11
Connecting the Telephone Line
On the base, plug the one end of the telephone line cord into the jack on the
back of the base and the other end into a modular wall phone jack.
Installing the Handset Battery
NOTE: You must connect the handset battery before use.
1. Locate battery and battery door which are packaged together inside a plastic
bag and are separate from the handset.
2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.
NOTE: It is important to maintain the polarity (black and red wires) to the jack
inside the compartment. To ensure proper battery installation, the connector is
keyed and can be inserted only one way.
4. Insert the battery pack.
5. Close the battery compartment by pushing the door up until it snaps
into place.
6. Place the handset in the base to charge.
Allow the handset to charge for 16 hours prior to first use. If you don’t
properly charge the handset, battery performance is compromised.
PRESS DOWN
FIRMLY
BLACK WIRE
RED WIRE
BATTERY