Filter
Top Products
12
USER NAME
HANDSET X
> ROOM MONITOR
HANDSET SETUP
Wall Mounting the Base
NOTE: For best results, leave the phone on a flat surface during initial charging
before you hang the phone on the wall.
1. Turn the base over.
2. Attach the wall mounting pedestal by first inserting the tabs on the open
edge of the pedestal into the slots on the lower portion of the bottom of the
base. Then push down and snap the pedestal into place.
3. Slip the mounting holes (on the back of the pedestal) over the wall plate
posts and slide the unit down into place. (Wall plate not included.)
Programming the Telephone
Standby Screen
The handset displays the handset number and user name.
Programming Functions
The system uses a menu structure to give you access to all of the built-in
features. You may program the following items in main menu: Room Monitor,
Handset Setup.
Room Monitor
(This is only applicable with addition of Model 25832A optional handset.)
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CALLER ID-VOL (- or +) button to scroll to ROOM MONITOR.