Filter
Top Products
3
PREPARATION
PRINTER PAPER INSTALLATION
1. Battery Installation
Insert 6 1.5V "AA" size alkaline batteries into the battery
compartment located on the rear of the Main Body. Be sure the
batteries are oriented as indicated in the battery compartment.
NOTE: Batteries must be alkaline type. Other types will not work.
2. Light Wand
Connect the Light Wand Cable to the connector jack located on
the right hand side of the Main Body.
It is recommended that the Connector always remain attached to
the Main Body. This will avoid possible damage to the connector.
3. A/C Adapter
Connect the A/C Adapter cable to the connector jack located on
the right hand side of the Main Body (the jack closest to the top of
the unit).