Filter
Top Products
30
1 Press 3.
The display will show either "F3 0" or "F3 1".
If "F3 0" is displayed, the Dotson-Davis Equation will be used and the Recommended Maximum Weight
will be printed.
If "F3 1" is displayed, the Dotson-Davis Equation will be omitted from the Body Fat Measurement
Program.
a) To Change Between Equations:
Press either 0 or 1 and the display will show the change.
b) Press ENTER if this is the correct change.
c) To Exit the Function Mode, turn the unit OFF.
F4 - Color Printer Selection
After entering the Function Mode:
a) Press 4
The display will show either "F4 0" or "F4 1".
If "0" is displayed, the unit is set to print using the Color Forms.
If "1" is displayed, unit is set to print Fitness Analysis on plain paper.
b) To change, press "0" or "1".
c) Press ENTER to save the change.
d) To Exit the Function Mode, turn the unit OFF.
F5, F7 and F8 are not used, but they must be set to "0" or the instrument will not function properly. F6 is not used, but must be set to
"1" or the instrument will not function properly.