CyberData 11111 Intercom System User Manual


 
Web Page Item Description
Audio Files
0-9 The name of the audio configuration option is the same as the spoken audio that
plays on the board (24 character limit).
'0' corresponds to the spoken word “zero.”
'1' corresponds to the spoken word “one.”
'2' corresponds to the spoken word “two.”
'3' corresponds to the spoken word “three.”
'4' corresponds to the spoken word “four.”
'5' corresponds to the spoken word “five.”
'6' corresponds to the spoken word “six.”
'7' corresponds to the spoken word “seven.”
'8' corresponds to the spoken word “eight.”
'9' corresponds to the spoken word “nine.”
Dot Corresponds to the spoken word “dot.” (24 character limit)
Audiotest Corresponds to the message “This is
the CyberData IP speaker test message...”
(24 character limit)
Page tone Corresponds to a simple tone used for beep on initialization and beep on page (24
char
acter limit).
Your IP Address is Corresponds to the message “Your IP address is...” (24 character limit).
Rebooting Corresponds to the spoken word “Rebooting” (24 character limit).
Restoring default Corresponds to the message “Restoring default” (24 character limit).
Ringback tone This is the ringback tone that plays when calling a remote extension
(24 character limit).
Ring tone This is the tone that plays when set to ring when receiving a call
(24 character limit).
Intrusion Sensor Triggered Corresponds to the message “Intrusion Sensor T
riggered” (24 character limit).
Door Ajar Corresponds to the message “Door Ajar” (24 char
acter limit).
Night Ring Specifies the ringtone for nightring. By default th
is parameter uses the same audio file
that is selected for the Ring Tone parameter.
The Br
owse button will allow you to navigate to and select an audio file.
The Play button will play that audio file.
The Delete button will delete any user uploaded audio and restore the stock audio
file.
The Sa
ve button will download a new user audio file to the board once you've
selected the file by using the Browse button. The Save button will delete any pre-
existing user-uploaded audio files.
Operations Guide 930500E CyberData Corporation
45
Installing the VoIP V3 Indoor Intercom
Configure the Audio Configuration Parameters
Table 2-15. Audio Configuration Parameters