Filter
Top Products
Operations Guide 930500E CyberData Corporation
21
Installing the VoIP V3 Indoor Intercom
Factory Default Settings
2.4 Configure the Intercom Parameters
To configure the Intercom online, use a standard web browser.
Configure each Intercom and verify its operation bef
ore you mount it. When you are ready to mount
an Intercom, refer to Appendix A, "Mounting the Indoor Intercom"for instructions.
2.4.1 Factory Default Settings
All Intercoms are initially configured with the following default IP settings:
When configuring more than one Intercom, attach the Intercoms to the network and configure one at
a
time to avoid IP address conflicts.
Parameter Factory Default Setting
IP Addressing DHCP
IP Address
a
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username admin
Web Access Password admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1
Table 2-4. Factory Default Settings